Can anyone advise where I may be able to get an aluminium moulding with an inner rebate of 40mm.
Have tried Arqadia and Nielsens and they are not able to help.
Thanks
George
Aluminium Mouldings
-
- Posts: 31
- Joined: Tue 31 May, 2005 3:25 pm
- Location: Sturmer, Haverhill, Suffolk
- Organisation: None
- Interests: My Land Rover Discovery
Photography - Location: Sturmer, Haverhill, Suffolk
-
- Posts: 31
- Joined: Tue 31 May, 2005 3:25 pm
- Location: Sturmer, Haverhill, Suffolk
- Organisation: None
- Interests: My Land Rover Discovery
Photography - Location: Sturmer, Haverhill, Suffolk
-
- Posts: 31
- Joined: Tue 31 May, 2005 3:25 pm
- Location: Sturmer, Haverhill, Suffolk
- Organisation: None
- Interests: My Land Rover Discovery
Photography - Location: Sturmer, Haverhill, Suffolk
-
- Posts: 1951
- Joined: Mon 09 Jan, 2006 12:06 am
- Location: Penzance Cornwall UK
- Organisation: Moonshine Framing Penzance
- Interests: 4 or 5 ...
- Location: West Cornwall, UK
- Contact:
-
- Posts: 31
- Joined: Tue 31 May, 2005 3:25 pm
- Location: Sturmer, Haverhill, Suffolk
- Organisation: None
- Interests: My Land Rover Discovery
Photography - Location: Sturmer, Haverhill, Suffolk
For those who don't want to waste any time on this, I have given a quote to this lady and was advised that she has been quoted the following:
£8-00 for natural wood 8x6
Black 8x6 for £14 from the States including shipping
and aluminium for £16-00
Don't know if those prices include glass, mountboard etc.
I think I would be subsidising her if I had to levy those charges
George (Trying to make a bit of a living)
£8-00 for natural wood 8x6
Black 8x6 for £14 from the States including shipping
and aluminium for £16-00
Don't know if those prices include glass, mountboard etc.
I think I would be subsidising her if I had to levy those charges
George (Trying to make a bit of a living)
-
- Posts: 1951
- Joined: Mon 09 Jan, 2006 12:06 am
- Location: Penzance Cornwall UK
- Organisation: Moonshine Framing Penzance
- Interests: 4 or 5 ...
- Location: West Cornwall, UK
- Contact:
and thats just those of us who use this forum and happened to look at the post who remember this enquiry.
Ive also been chased twice by phone for a price, although I'd said "around a tenner, for plain wood, and VAT and delivery on top" I thought that would put her off.
An over the counter shop customer, who was genuinely in the trade, and who I thought would come back might get the same for around £8 each, in plain wood, which include offcuts from our shirt frames and medal cases and on a "when we have the time" basis.
Shame a lot of these enquirers (enquirees??) who cut and past the same enquiry to every framer whose email address they can find dont realise that we mostly dont want or need a one off job from someone whose going to be trying to find it cheaper again next time.
And are we therefore all ready for the "ok if i have a hundred how much are they" and "so can you send me a sample, of say, 10, at that price please" gag.
The old ones are the best.
Ive also been chased twice by phone for a price, although I'd said "around a tenner, for plain wood, and VAT and delivery on top" I thought that would put her off.
An over the counter shop customer, who was genuinely in the trade, and who I thought would come back might get the same for around £8 each, in plain wood, which include offcuts from our shirt frames and medal cases and on a "when we have the time" basis.
Shame a lot of these enquirers (enquirees??) who cut and past the same enquiry to every framer whose email address they can find dont realise that we mostly dont want or need a one off job from someone whose going to be trying to find it cheaper again next time.
And are we therefore all ready for the "ok if i have a hundred how much are they" and "so can you send me a sample, of say, 10, at that price please" gag.
The old ones are the best.