The Framers Forum

Can anyone help. I am trying to source a deep rebate moulding with the following specs... Colour smooth white.. 20mm Flat 45mm deep leaving a rebate depth of 35mm. I will need it in box qtys.

Simons K/0400 an d K/0442 Not shure what the finish is like though. Arqadia 233127000 may be a little deep though also 23510200 may not be deep enough. Also Lion L1192 again probably not deep enough.

Thank you so much, I have ordered samples.

Finton do a nice one with a double rebate their moulding ref 1947

Here is a link but it may only work if you have an account with them:
http://www.frintonmouldings.com/iqs/cpt ... dings.html

The second rebate will take the back board.

Only trouble is it is a bit pricey.

Its really kind of you to take the time to help , your right it is a bit on the pricey side. I have been framing for 37 years now but finding this one has had me stumped. Thanks again..... Dave the frame

Have you tried Ashworth & Thompson? They sometimes do runs of mouldings for contract customers which are not in their catalogue

Fixed me up with some deep rebate moulding in pink at one time.

Hi Johnny
I have not tried Ashworth yet but will do in morning.. Many thanks

I find 233127000 a nightmare to cut on the Morso, lots of breakout.

Wessex do one c2139. They also do it in chop, so no waste

Here's two new additions from Simons, so new they never made it in to the new catalogue .... !

The first is bang on the sizes you specify but has a filled grain surface; for the quantity you want it will be around 40p per ft. The second is slightly shallower but has a smooth finish (and I cut the reference no out - sorry)

There's more like this, just not in the catalogue.

I am so grateful, I have just mailed simons for the samples. You are a star as well as all of the other framers who have taken the time to help me out.. Thanks again Dave the frame