Cassese 810 problem

Get help and framing advice from the framing community
Post Reply
Rabbie Side Burns
Posts: 26
Joined: Sat 20 Nov, 2010 9:37 am
Location: Shropshire
Organisation: Art Framing
Interests: Guitar playing, listening to the music of Jean Sibelius, tasting many varied ales.

Cassese 810 problem

Post by Rabbie Side Burns »

Hi folks - was wondering if one of you guys could shed some light on a machinery breakdown problem I have had. I have an old Cassese CS810 underpinner which had a problem when firing - the metal block blew off the back of the firing button. I have put the components back together and put it back in place, and the machine is now firing again, but as the block is not screwed on in any way, I assume that this is going to happen again unless a component is replaced. Is it just that the tiny rubber washer inside is worn, or is the problem a bit more complex? I'll be on the phone to Lion on Monday morning, but wondered if any of you have experience of this?
Thanks

Rob
Top
User avatar
MITREMAN
Posts: 537
Joined: Thu 07 Feb, 2008 8:05 pm
Location: Norwich, Norfolk
Organisation: Framers Equipment Ltd
Interests: Conservation & box Framing memorabilia, Fishing, Sports, Keeping fit & healthy, Supporting Southend United, Computing, Cooking, Ale drinking (Camra Member), Eating out, films, Music and Concerts, DIY, Socialising, Walking, Holidays, Forest School, Wood Carving, Grandchildren and anything else I can fit in.
Location: Northampton
Contact:
Contact MITREMAN

Re: Cassese 810 problem

Post by MITREMAN »

Hi Rabbie Side Burns,

The part is not repairable you will require a new switch.

Kind Regards
Mitreman :(
MITREMAN
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
Top
Rabbie Side Burns
Posts: 26
Joined: Sat 20 Nov, 2010 9:37 am
Location: Shropshire
Organisation: Art Framing
Interests: Guitar playing, listening to the music of Jean Sibelius, tasting many varied ales.

Re: Cassese 810 problem

Post by Rabbie Side Burns »

Thanks very much Mitreman - at least I know what I am dealing with now. The underpinner is still operating but I will get the switch replaced asap.

Thanks once again. :)
Top
Post Reply

Return to “Help!”